Koolance DCB-FM01 Manual de usuario descargar pdf

DCB-FM01 Flow Meter Adapter and Display v 1.0

The DCB-FM01 displays flow rate or pulse signals from Koolance INS-FM16, INS-FM17/N, or INS-FM18

flow meters. It also multiplies the flow meter signal to allow readability by most fan tachometer headers.

Connect the appropriate wires as shown below.

Power-In and Tach-Out

Tubing ID

Switch

INS-FM17/N or INS-FM18

Connection

Change Flow Meter Model Change Display Units

INS-FM16 LED

Control

INS-FM16

Connection

Flow

Meter

12VDC Power Supply

Connection

Tachometer RPM

Output

With the included wiring harness, connect a 12V DC power supply input. Optionally, plug the tachometer

output wire to a header capable of reading fan RPM values. RPM values from the DCB-FM01 will correspond

with milliliters per minute.

Set the “TUBING” switch based on the internal hose diameter connected to the flow meter: 6mm (1/4in)

ID tubing, or 10mm/13mm for 10mm (3/8in) or 13mm (1/2in) ID tubing.

With the “METER” button, select the Koolance flow meter model being used. Change the units shown

on the front display with the “UNIT” button (LPM = liters per minute, GPM = gallons per minute, Hz = raw

impeller pulse rate).

DCB-FM01 includes a mounting bracket and

bezel for a computer 5.25in drive bay. This can

be attached or removed via four screws.

Bracket Mounting

Screws

The multiplication factor of the flow meter can be adjusted. This may be useful when using another flow

meter or one with customization. To adjust this, hold ▲ (METER) until “FAc” appears. The LED digits

will begin flashing. Use ▲ or ▼ individually to increase or decrease the pulse signal factor. Adjusting the

multiplication factor will also affect the tachometer (RPM) output value. When finished, wait a few seconds

until the display stops flashing.

To revert the multiplication factor to default, hold ▼ (UNIT) until “dEF” appears.

Modifying The Pulse Output

Indice de contenidos

Pagina 1

DCB-FM01 Flow Meter Adapter and Display v 1.01The DCB-FM01 displays flow rate or pulse signals from Koolance INS-FM16, INS-FM17/N, or INS-FM18 flow me

Comentarios a estos manuales

Sin comentarios

Koolance DCB-FM01 Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Koolance DCB-FM01. Koolance DCB-FM01 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Koolance DCB-FM01