Koolance PSU-1000ATX-12N-R Manual de usuario

Protected by U.S. Patents 6,313,990; 6,664,627; 7,167,366; 7,295,436 Other Technology Pending U.S. & World-Wide PatentsSuperior Liquid Cooling Sy

8Once the power supply is mounted inside the chassis, insert and tighten the desired inlet and outlet nozzles (purchased separately).These should only

9User ManualSpecifi cationsAC InputOperating Range: 110-240VAC, Auto-switchingFrequency: 47-63HzCurrent: 12A @ 110V, 6A @ 240VACPFC: ActiveEffi ciency:

10Limited WarrantyDisclaimerKoolance Incorporated (“Koolance”) warrants each new PSU-1000ATX-12N liquid-cooled power supply (“the system”), against de

www.koolance.comISO 9001Printed in Korea

If shutting-down the power supply using the rear illuminated power switch, it may become necessary to reset the unit before it can be powered-up again

This User Manual is updated regularly. Please be sure to check our support page for a newer version of this guide: www.koolance.com/supportGENERAL PRE

2WARNING: Never open the power supply, expose the internal liquid coolant, or remove the internal liquid coolant. If liquid is removed, the power supp

3User ManualInternal ConnectionsThe modular connections must match their appropriate plug on the PSU (power supply unit). Pay careful attention to the

4External ConnectionsHow the PSU-1000ATX-12N is CooledMain AC Power InExternal Nozzle Socket (In/Out)The PSU-1000ATX-12N power supply is not a self-di

5User ManualIf your chassis has a rear PSU mounting plate, this may need slight modifi cation to allow the PSU-1000ATX-12N rear heat exchanger to fi t p

6For most computer cases, the PSU-1000ATX-12N must be installed from inside the chassis due to its width. If you do not have a Koolance case, please s

7User ManualInstallationCarefully guide the power supply into the chassis (per normal installation).Screw the PSU-1000ATX-12N to the computer chassis’