Koolance ERM-3K4U5 Manual de usuario descargar pdf (Pagina 15)

Depending on the cooling blocks (“coolers”) in your Koolance system and tubing

sizes, they may be connected in series, parallel, or a mixture of both for best

performance. Recommended conﬁ gurations are illustrated below.

NOTE: For simplicity, tubing ID (internal diameter) will be listed in metric units.

Please use these approximate conversions for emperical sizes:

Cooler & Tubing Conﬁ guration

Series Tubing

For loops with only a few blocks, a simple series loop should provide the best

overall performance. For an ERM-3K4U unit, a single “loop” connects to the same

pump inlet and outlet. This conﬁ guration can be duplicated on each pump.

Metric Emperical

6 mm 1/4 in.

10 mm 3/8 in.

13 mm 1/2 in.

Hose Adapter

“Y” Hose Splitter

1st System

CPU Cooler

1010

“F” Hose Splitter

Connecting ERM-3K4U Systems

3/8” (10mm) or 1/4” (6mm) ID

Rear quick disconnect nozzles for 3/8” (10mm) internal diameter tubing are

included with the ERM-3K4U. If desired, these pump inlets and outlets can be

converted directly to 1/4” (6mm) ID lines using optional Koolance quick disconnect

nozzles. For 1U proﬁ le computers, 1/4” (6mm) ID is recommended.

2nd System

CPU Cooler

3rd System

CPU Cooler

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 28 29

Sin comentarios

Koolance ERM-3K4U5 Manual de usuario Pagina 15