Koolance ERM-3K4U5 Manual de usuario descargar pdf (Pagina 22)

User Manual

Testing & Filling

Once all of the coolers have been con-

nected, the system can be ﬁ lled with

coolant. The reﬁ ll plug is located on top

of the reservoir bay unit.

Unscrew the small metal refill plug

by hand. If it is too tight, use pliers to

loosen it gently.

To avoid damaging the tank thread-

ing, never use tools to tighten the

metal reﬁ ll plug when screwing it

back in.

WARNING: The liquid coolant is electrically conductive. Use caution

when ﬁ lling the system, and keep all liquids away from computer

hardware and power cables. In case of emergency during installation,

immediately unplug the computer’s rear power supply cable. Dry the

system thoroughly before proceeding.

Slowly ﬁ ll the system using the supplied

funnel and coolant.

Do not overﬁ ll the reservoir. It is recom-

mended to keep paper towels on hand

just in case. The liquid coolant should be

ﬁ lled up to about 13mm (1/2”) from the

reservoir’s top.

Replace the reservoir’s reﬁ ll plug.

To maintain the product warranty, use only

Koolance approved coolant. Many alter-

native “liquid coolants” and additives can

cause permanent damage to Koolance

equipment and computer hardware.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29

Sin comentarios

Koolance ERM-3K4U5 Manual de usuario Pagina 22